SPECIFICATIONS
Brand Name: Warmdance
Installation Method: self-contained
Is Bulbs Included: Yes
Certification: CE
Origin: Mainland China
Hign-concerned Chemical: None
Power Source: AC
Luminous Flux: 2000-82000
Item Type: Stage Lighting Effect
Style: DMX Stage Light
Occasion: Professional Stage & DJ
Material: Hardware + plastic
Voltage: 90-220V, 50-60HZ
Light source: 7 four in one lamp beads +48 SMD LED lamp beads
Source channel: 6/10CH
Control mode: DMX512, sound control, self-walking, master-slave
70W RGBW 4-IN-1 LED PAR LGHT WITH STRIP
Wide range of uses
Suitable for DJ, performances, concerts, nightclubs, parties, bars, KTV, etc., to increase the dynamic atmosphere.
Simple installation, easy to start
Convenient and easy installation design, simple operation, easy and efficient.
Packing List:
Par light *4, Accessory *4
Warning:
Stop using it if the fuse is still blowing after being replaced. Please contact customer support for further instructions, continued use may cause serious damage.
After the power is plugged in and the switch is turned on, "rSt" is displayed. The moving headlights are being reset, please do not operate.
(1)Plugged into a grounded power outlet for indoor use only.
(2)Don't expose the device to rain or moisture, avoid the risk of fire or electric shock. Make sure that no flammable objects near the device.
(3)Install the equipment in a well-ventilated place at least 50cm from any surface, and ensure that the ventilation slots are not blocked.
(4)Disconnect the equipment from the power supply before any operation.
(5)The ambient temperature should not exceed 40°C, and the maximum ambient temperature is 45°C. Don't operate the device at higher tempratures.
(6)The equipment should be stopped immediately, if a fault occurs, and do not repair the equipment by yourself. Improper maintenance can result in damage and malfunction. Contact technical support for repair approval. Only the same accessories can be used with the original parts, and make sure the power cord is not blocked or damaged.
(7) Do not expose your eyes to light sources, which can be a sign of a seizure in sensitive people.
(8)The lamps are only used for decoration and not suitablefor ordinary household lighting.
(9)Replacing the fuse: Unplug the device from the power supply, remove the fuse holder from its original position with a srewdriver, take out the burnt fuse, replace the fuse with the same characteristics, then re-rotate the screw, and connect the device to the power supply superior.
(10)WARNING: Stop using it if the fuse is still blowing after being replaced. Please contact customer s
top of page
PriceFrom $132.72
Excluding Taxes |
bottom of page