SPECIFICATIONS

Brand Name: Helppro
Motor Type: Induction Motor
Origin: Mainland China
Include Accessories: Yes
Item Type: Car Washer
Item Weight: 9
External Testing Certification: ce


Feature:
1. Large water output is very useful for cleaning cars, air conditioners, furniture, watering flowers, etc.
2. With visual pressure gauge
3. Automatic shutdown
4. Induction motor
5. Self-priming and dual-purpose
6. Working long hours
7. Small size


Fourth generation parameters:
Specification:
Voltage: 220V/50-60hz
Peak power: 2300W
Pressure: 0-45Mpa
Flow: 15L/min
Motor: induction motor
Maximum water inlet temperature: 40°C
Inlet pipe thread: 3/4''GHT(F)
Outlet pipe thread: M14X1.5
Pump head material: copper pump head
ize:16*36*25
Bare metal weight:
Whether there is a pressure gauge: Yes
Whether the water pressure is adjustable: Yes
Plug: South Korea (1.3 meters long)

Package Including:
1 x cleaning pump
1 x Extended water gun
1 x foam jug
1 x filter
1 x copper water inlet
1 x copper Quick Connect Spout
1 x water tap connection
1 x water inlet pipe (1.8m long)
1 x high pressure outlet hose (16m long)

illustrate:
1. The plastic water inlet and outlet are easily damaged after long-term use, so the copper water inlet and outlet are upgraded for free; the original plastic water inlet and outlet can be used as spares.
2. When the machine is started, the motor will start to boost, and it will stop in about 3 seconds, and it can be used normally.
2. The video in the main picture is actually recorded by us unpacking, and the product received is the same (color or outer packaging may change).
3. Manual measurement, color, there may be a little difference

Reason for no water:
(1) No water at all:
1. The water inlet is not installed properly: the water inlet pipe is connected to the faucet pump, turn on the faucet, check whether there is water flowing out from the connection of the water inlet, if there is water flowing out, it is not installed properly, align the interface and reinstall.
(2) There is very little water out of the water gun
1. Into the air:
a. Shut down, remove the outlet pipe.
b. Turn on the machine, and a large amount of water will flow out of the water outlet, then it will be fine.
c. Shut down and install the water inlet pipe, then it can be used normally.

Under normal circumstances, after the machine is pressurized, the water inlet pipe is difficult to disassemble.
But the outlet pipe can be easily disassembled after entering the air.